Emporia Vue: Gen 2 3-PHASE Whole Home Energy Monitor

Free Shipping
Emporia Energy

If you are looking for more details, kindly visit our website.

Emporia has developed the next generation of the Vue Energy Monitor. Committed to bringing the best value at the lowest price possible, the Vue provides everything you need to monitor your entire home's energy usage in real time. See how much electricity your home is using anywhere, anytime.

Features and Benefits:

• READY FOR 3-PHASE: Includes an extra 200A Sensor for light commercial 3-phase/4-wire electrical systems (up to 415Y/240VAC & less than 600A ). Does not work with 3-phase/3-wire systems (Delta systems with no neutral). 

  NO NEED TO PURCHASE AN EXTRA SENSOR

• INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors; although it doesn't typically work in panels with access only to busbars. INSPECT YOUR ELECTRICAL PANEL for compatibility. 

• 24/7 ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. PROTECTED BY A 1-YEAR WARRANTY.

• LOWER YOUR ELECTRIC BILL: Gauge real-time spending and get actionable notifications to understand where you can save costs.

• REAL-TIME ENERGY DATA: REQUIRES 2.4 GHz WIFI WITH AN INTERNET CONNECTION to monitor energy use with iPhone / Android / Web app. Vue sensors collect energy data and are accurate from ±2%. The Vue is UL and CE Listed for your safety. 1 second data is only available in the app (when actively open) and retained 3 hours. Minute and hour data are retained in the cloud. 1 minute data is retained 7 days, 1 hour data is retained indefinitely. Export cloud data whenever you want in the app.

• APPLIANCE MONITORING WITHOUT GUESSWORK: Add up to sixteen 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc. 

• Power the Vue directly from a 15A or 20A breaker
• Professional installation recommended
• Granular 1-second data interval
• Operates regardless of your utility
• Add up to sixteen 50A sensors to monitor individual circuits
• Interact with your Emporia Vue through your mobile device or laptop
• Real-time monitoring of your energy usage and production with helpful units and measurements
• Actionable notifications will help you:
• Conserve energy
• Lower carbon emissions
• Increase grid reliability
• Generate energy savings
• Shift usage patterns from peak to off-peak
• Get clear calculations that show your savings when you perform actions recommended by the Emporia Vue

Check out the Technical Specs | Download the Spec Sheet PDF

Vue energy monitor dimensions:

• 4.1" x 3.1" x 1.1" (105mm x 80mm x 30mm)
  

200A sensor dimensions:

Goto acrel to know more.

• 2.6" x 1.7" x 1.6" (65mm x 44mm x 41mm)
• Window diameter: 1" (26mm)
• Cable length: 39" (1m)
• Connector plug: 3.5mm

ME337 panel type three-phase multi-function power meter, external open Rogowski coil or voltage,type CT, realize the test without removing the wire, simplify the test steps, and save construction costs.ME337 supports three-phase four-wire, three-phase three-wire, one-phase three-wire and single-phase,systems; It can measure multiple electrical parameters such as voltage, current, power factor,harmonics, power, and energy of A, B and C phases.ME337 is equipped with RS485 communication interface, through the standard Modbus-RTU,protocol, can be compatible with various configuration systems, the front-end collected electrical,parameters real-time transmission to the system data center.

Wiring Terminals:

Wiring Diagram:

Meter support wiring type, three-phase four-wire 4CT (3P4W_4CT), three-phase four-wire 3CT(3P4W_3CT), three-phase three-wire 3CT (3P3W_3CT), three-phase three-wire 2CT (3P3W_2CT),one-phase three-wire (1P3W), one-phase two-wire (1P2W)

Three-phase four-wire 3CT

Three-phase three-wire 3CT

Dimensions:

For more 3 phase power monitorinformation, please contact us. We will provide professional answers.