LED chips (also known as surface mounted diodes or SMDs) are all identified by a four-digit number. This code is less complicated than it looks &#; it simply indicates the size of the LED chip. For example, the dimensions of SMDs on LED strip lights are 5.0mm x 5.0mm.
Goto Moonleds to know more.
LEDs like s, s, s and s aren&#;t really different types of chip at all &#; they&#;re simply different sizes. Each has its own spec: different power requirements and output brightness. The best choice depends on what&#;s right for your project.
You can find out more about each LED chip below.
Measuring 3.5mm x 2.8mm, the SMD is a smaller chip than the LED strip SMD. You will most often find chips on 12-volt LED strips, drawing 4.8 watts (also known as 4.8w p/m or 5w p/m LED tape) with 60 SMDs per metre.
These strip lights output around 330-360 lumens per metre, depending on colour (equivalent to a 40w halogen) &#; enough to produce a smooth, bright effect when shining onto any surface.
InStyle offer red, green, blue, amber, and both warm and cool white SMDs as standard colours. (We can also supply other white colour temperatures, made to order.)
60 SMD p/m LED strip lights are typically used for feature lighting &#; such as plinth or coving lights, in homes, bars, restaurants, hotels and other locations.
Though less common than standard 60 SMDs p/m LED tape, SMDs are also used on LED strip lights with 120 chips per metre. Pulling 9.6 watts (known as 9.6w p/m or 10w p/m LED tape), these tapes are available in the same range of colours. Light output is exactly double that of 60 SMDs p/m tape &#; they have twice as many LEDs &#; so that&#;s around 660-720 lumens per metre, depending on colour.
120 SMD p/m LED strips are used for the same kind of feature-lighting applications as its standard alternative. We recommend them for locations with strong ambient light, where more brightness is needed than the 4.8w p/m can produce.
The cut points for our 60 SMD-per-metre LED strips are 50mm apart. The 120 SMD p/m strips have cut points at 25mm intervals. Both types are also available in waterproofed versions (IP67-rated).
Strip lighting is the modern way to light up your space. However, not all LED light strips are alike. Before you choose LED chip lighting for your application, you should know which chips will provide the right color and intensity for the conditions and which will serve you best over time.
The most popular chips available for strip lighting are the SMD and the SMD . Less common but extremely efficient, the SMD employs new technology that brings some fresh possibilities to the world of strip lighting. While the names sound highly technical, they are actually simple in origin.
SMD stands for surface-mounted diodes. Each LED chip is mounted onto the surface of a flexible circuit board without a wire or the need to drill into or cut the board. Instead, the diodes are soldered into place. This type of circuit board and mounting allow for maximum flexibility in how the lighting can be used.
The numbers indicate the physical dimensions of the LED chip. Size is not the only difference between the chips, however. They vary in brightness, color availability, and efficiency too.
An SMD LED chip is 3.5mm wide by 2.8mm long. This is the most common. Light strips featuring SMD chips are generally used for accent lighting, as they offer a low light output of only six or eight lumens per diode or chip.
Each chip contains only one diode, so each strip is a single color. These light strips are available in two shades of white: cool or warm. They also come in red, green, and blue. As with all LED strip lighting, these single-diode strips are dimmable.
The SMD chip is larger than the ; it measures 5.0mm by 5.0mm. Also very popular, this LED chip offers up to 22 lumens of light per chip, providing roughly two to three times the brightness of the chip.
The chip contains three diodes and is available in single or multicolored options. With a remote controller, you can dim these strips or adjust the color. With the brighter light of the , you can dim down to the equivalent light of the if you need lower lighting conditions.
This chip is 2.8mm by 3.5mm. It has the same dimensions as the but in a different orientation. As is true with the other LED chip options, brightness is not determined or limited by size. These high-output chips are brighter and more efficient than the or the LED chips.
The chip uses, on average, a little less power than a chip but produces about 20% more light. They are smaller in size as well, so they can be mounted more closely for higher density on the circuit boards, providing the brightest possible strip lighting of all three chip options.
The SMD has another advantage: These chips stay cooler during use than the others. As a result, they have the longest life span. These little powerhouses are not available in multiple colors. They are made only in shades of white. Like the other chip options, however, they are dimmable.
Strip lighting is very adaptable. It can be used for accent lighting, task lighting, or even as the main source of light in a living or workspace. The brightness of the light is only limited by the number, density, and type of LED chip used.
The company is the world’s best square led chip size chart supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Decide first whether your lighting will ever potentially get wet. If moisture exposure is possible, choose outdoor strips. Otherwise, indoor lighting is an appropriate option.
How much light will you need? Consider the use of the space. For the widest range of lighting conditions, include a dimmer and choose strip lighting that is bright enough for the maximum amount of light you might require.
Brightness is determined not just by the type of LED chip used but also by the density of the chips on the circuit board. The more chips per foot or meter of the light strip, the brighter the light, regardless of which type of chip is used.
For the most light with maximum energy efficiency, your best options will use a high density of SMD chips. For minimal light, such as accent lighting, a low-density strip using the SMD is very economical.
Will you want to adjust the color of the lighting? In that case, you need to choose strip lighting with SMD chips. Note that you will also need to include a controller with your LED light system to manage the color of the light.
Regardless of your application, choose high-quality strip lighting with the right LED chip type and density for your project. You will never regret purchasing well-made, premium lighting. Once installed, your strip lighting should provide years of trouble-free performance. Here is how you can select the best products for your application.
Look for products that use thick, sturdy copper for the circuit boards. Choose light strips that won't crease when flexed. Strip lighting should bend easily without breaking. A durable circuit board provides reliability and a longer life for your installation.
Select brighter lights for more flexibility. For example, the Luma 20 can provide over 475 lumens per foot, which is ideal for general or task lighting. With this intense brightness, you can see clearly to work or prepare a meal. A dimmer gives you the option to lower the light when you are ready to relax or perhaps enjoy your meal with softer lighting and a few candles on the table.
Brighter light is accomplished by using a higher density of the right LED chip type. The more chips per foot generally mean the higher the cost of the lighting. You will pay a little more, but you will benefit by having the right light for a wide variety of uses.
UL, originally known as Underwriters Laboratory, performs strict safety testing on electrical products. A UL listing ensures that your strip lighting has been evaluated and has met UL's high standards.
Some strip lighting products on the market don't have a UL listing. Confirm that your selections have been through this rigorous testing procedure to reduce the risk of shock or fire hazards. If you are a contractor or other building professional, you may find that a UL listing is required for approval of your lighting installation.
Strip lighting is low voltage but should still be safety tested and approved. Be safe. Insist on a UL listing for any electrical product, including strip lighting.
A UL listing ensures that you're selecting a safe product, but it is not a warranty. How long will your new strip light installation last? That will depend on many factors, such as which type of LED chip is used, the quality of the circuit boards, and whether your strip lighting is in continuous use.
A warranty tells you that the company stands behind its product. HitLights offers a six-year warranty on its strip lighting. This is a promise of quality and durability. When you have a good warranty, you know your installation will perform as expected for years to come.
Each strip lighting installation is a little different. Calculating your total watts is easy. Each product will have the watts required per foot printed on the package. This is the number of chips per foot multiplied by the power needs of each LED chip used.
Multiply this number by how many feet of strip lighting your application will require. For example, if your light strip uses two watts per foot and you need 30 feet of lighting, you will require 60 watts of power. A 20% safety factor is required when choosing the correct power supply. In this case, where the load is 60watts we cannot select a power supply that is also 60watts. Doing so will overload the power supply, we need a buffer of at least 20% or the load should not exceed 80% of the power supply's maximum wattage capacity.
One of the great features of strip lighting is its flexibility. You can have exactly the lighting you need right where you want it. Each application is unique. You may decide to use batteries for portable lighting to illuminate your vehicle or just to add a little light to a dark corner where no outlet is handy.
Perhaps you want to light up that stairway for safe passage in the dark or have dimmable lighting in your building that can convert the space to be more usable during darker hours in the morning or evening. From festive patio lighting for your summer events or security lighting in an apartment building corridor, there is a proper LED chip and strip lighting solution for your project.
Visit us at
HitLights
for expert assistance and check out our many options of lighting, controllers, connectors, and dimmers for every application. We will help you find the right strip lights and accessories to create the perfect lighting to bring your installation to life.
For more dip led panelinformation, please contact us. We will provide professional answers.