Electrical conduit is a raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges, electrical conduit is an integral part of the modern world around us.
The company is the world’s best galvanized steel flexible metal conduit supplier supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Depending on the application there are many different types available. The specified conduit for your project may be rigid or flexible and will offer varying degrees of protection from impact, corrosion, gases and vapors, moisture, fire, and even electromagnetic interference, depending on the needs of the installation environment. Environments that are wet, highly corrosive, or hazardous typically require specialty conduit.
Electrical conduit may also be permitted per the National Electrical Code (NEC) for use in direct encasement (or direct burial) in concrete, which is common in commercial applications. The ability to field bend conduit, as well as its allowable support spacings will impact how many fittings (couplings, elbows, connectors) are needed for a project and also have a direct impact on cost.
Rigid Metal Conduit (RMC):
RMC is composed of heavyweight galvanized steel and installed with threaded fittings. Known for being very strong, RMC is unfortunately one of the more expensive electrical conduits when it comes to both materials and labor. Aluminum is another material used for RMC, and may have additional coating applied to better resist corrosion.
Galvanized Rigid Steel (GRC):
Approved for indoor and outdoor applications, GRC is made from steel and is traditionally found in industrial and commercial applications, GRC has been a long-time industry standard and benefits from impressive impact resistance, as well as UV-stability and the ability to protect from EMI (electromagnetic interference). Unfortunately, its heavy weight and poor field handling make GRC particularly expensive to install and it can be highly susceptible to corrosion. GRC&#;s conductivity makes it susceptible to fault conditions in which the conduit and wire may weld together.
Intermediate Metal Conduit (IMC):
Approved for the same applications as RMC, IMC is a steel conduit that is slightly lighter than RMC and rated for outdoor use. It can be more cost-effective than RMC, available threaded or unthreaded, and may or may not be coated. Compared to GRC and RMC, IMC has much thinner walls that can handle more wire fill but is more susceptible to kink. IMC only goes up to 4 inches in trade sizes, so it is significantly smaller than other conduits.
Electrical Metallic Tubing (EMT):
Thin-walled and unthreaded, EMT is typically made of coated steel and used in place of GRC in commercial and industrial applications, though it is commonly found in residential applications as well. It can also be made of aluminum and is approved for use in concrete but is not permitted to be installed where subject to physical damage. EMT is not able to offer the same level of protection as GRC. It is easily bent but can not be field threaded because of its thinness. Common trade sizes run from .5 inch to 1.5 inches.
Rigid Nonmetallic Conduit (RNC):
Non-metallic, unthreaded, smooth-walled tubing is available in multiple substrates including high-density polyethylene, PVC, and RTRC (fiberglass). The capabilities and specs vary by substrate but several forms of RNC are approved for underground or direct burial use.
RTRC Conduit:
Available in various wall thicknesses and threaded, RTRC (reinforced thermosetting resin conduit), or fiberglass conduit is created by tension-winding strands of fiberglass over a rotating mandrel, before impregnating the strands with resin and curing under high temperature, resulting in high flexural strength and high-temperature resistance. RTRC features the broadest range of corrosion resistance of all in-market conduit materials, as well as low burn-through, UV stability, superior temperature range (including excellent handling in low temperatures), and the ability to retain its original shape after impact. Its support distances are comparable with GRC, PVC-coated steel, and aluminum electrical conduit.
RTRC is significantly lighter in weight than traditional conduit materials, resulting in the lowest labor installation rates for most diameters per the National Electrical Contractors Association (NECA) Manual of Labor Units. In terms of raw material costs, it is one of the more affordable electrical conduit options. Phenolic RTRC meets NFPA 130 requirements and is suitable for speciality applications requiring low smoke, no flame, zero halogen, 2-hour fire-rated conduit for use in Class I Div 2 areas.
Fiberglass conduit elbows are the preferred electrical conduit for utility and data center projects for their low coefficient of friction, lack of burn-through and fault resistance.PVC Conduit:
Available in varying wall thicknesses and threaded, PVC is light and commonly used for applications requiring non-metal electrical conduit. PVC conduit is not recommended for use in direct sunlight due to poor UV stability. It is relatively easy to heat and field bend with the use of a hotbox conduit bender, but must be mounted to allow for expansion and contraction due to a high coefficient of thermal expansion, and may deform after installation in environments that are too hot. Traditionally PVC has been an inexpensive conduit, however, in recent years it has become more expensive and harder to source, due to ongoing supply chain issues. In these cases, American-made RTRC is often substituted.
Electrical Nonmetallic Tubing (ENT):
Thin-walled and corrugated, ENT (electrical nonmetallic tubing) is flame retardant but not fire rated. It is not approved for use in exposed locations but is commonly used inside walls or within concrete blocks. Known for its extreme flexibility ENT can be field bent by hand without requiring any special tools or the application of heat. ENT is available in PVC in trade sizes up to 2 inches. Its support spacing is limited to 3 feet and within 3 feet of terminations.
National Electrical Code (NEC) guidelines, local codes, and engineering specifications most often dictate which conduit to consider for use in a project. Although size and type are key aspects, there are many characteristics to consider when choosing an electrical conduit, including:
The correct conduit should:
If you are looking for more details, kindly visit flexible metal conduit exporter.
For help selecting a conduit, reach out to an Electrical Sales Rep to learn more.
Aluminum vs Steel Flex Conduit
When comparing aluminum vs. steel flex conduit, a lot of people just assume that steel is the better choice. The experts at American Conduit are more than willing to show you why that simply isn&#;t the case. We believe that once you take a closer look, you&#;ll see why aluminum is the way to go &#; each and every time.
American Conduit is the leading provider of aluminum conduit in the country. We&#;re proud to be associated with Hydro, the world&#;s largest aluminum extrusion company. That gives us a virtually unlimited supply of aluminum for all of your conduit needs. You&#;ll never have to worry that we&#;ll run out, because we have about one million pounds of aluminum in stock at all times.
You&#;ll also never have to worry that we won&#;t be able to deliver your conduit on a timely basis. The reason is that we have a nationwide network of more than 20 warehouses, as well as more than 30 distributors. You&#;ll always get your conduit on your timetable, so downtime will never be a concern. Also, thanks to our relationship with Hydro, you&#;ll get your conduit at extremely affordable prices.
So now that you know you can trust American Conduit to provide you with the highest quality aluminum conduit available, let&#;s take a look at just some of the many reasons why aluminum is superior to steel.
The first thing you look at when planning a project, of course, will typically be cost. You want to save as much money as possible &#; and aluminum will help you do just that. Aluminum conduit costs about 10-20 percent less than steel per foot. But the labor savings can be even more significant.
Aluminum is only one-third the weight of steel. The average 10-foot section only weighs about 35 pounds &#; the same amount of steel conduit weighs closer to 100 pounds. As a result, it only takes one worker to carry aluminum conduit and install it. It would take at least two, and maybe three workers to perform the same tasks with steel conduit.
Instead of having to devote three workers to a project, you only need to assign one. You can assign the others to different projects, saving time and greatly increasing efficiency.
You might assume that steel is stronger than aluminum, but that&#;s not true &#; at least when it comes to our conduit. We use special alloys to strengthen our aluminum conduit, so it will be just as strong. It will also last longer, since aluminum won&#;t rust or corrode like steel. Even when exposed to the elements, aluminum will not degrade.
If you use steel conduit in a volatile environment, you&#;re taking major chances. Steel emits sparks, which can sometimes increase the risk for disaster. That&#;s not a problem with aluminum, because it&#;s non-combustible. You can use it with complete confidence, even in areas such as oil refineries, grain elevators, wastewater treatment facilities, and many others.
Please get in touch with American Conduit if you want to learn more about aluminum vs. steel flex conduit. We will not only tell you why aluminum is better, we&#;ll also answer any questions about what type of conduit is best for your specific needs. Contact us online or call 1.800.334..
For more flexible metal conduit supplierinformation, please contact us. We will provide professional answers.