Best Practices for Antenna Placement - AES Corporation

21 Oct.,2024

 

Best Practices for Antenna Placement - AES Corporation

Use the -EMK Kit with a rubber duck antenna to help locate the best area inside the building for RF reception. While the Subscriber is powered from the battery and on the floor or a table in the general area of its final mounting place, install the antenna to the -EMK to create the necessary radials for RF signal reception. Move the mounting kit/ antenna around the room (the higher the better) using a 6 ft., 10 ft., or 25 ft. cable to verify the signal. Every time you move the antenna make sure to hit the Reset button on the Subscriber.

If you cannot find a signal using the rubber duck antenna, you can swap it for a 3dB, 5dB, or phantom antenna and continue to use the -EMK Kit. If NetCon5 cannot be reached within 5 minutes, you may have to consider remoting the antenna to the roof.

Check now

mide Product Page

Contact us to discuss your requirements of Geodetic Antenna. Our experienced sales team can help you identify the options that best suit your needs.