Today, I am going to show you how to buy a suitable socket clevis.
The company is the world’s best Galvanized Steel Socket Clevis supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Remember, socket clevis is an important pole line hardware, and choosing a bad one can be costly.
So in this article, I will take you through basic definition, main components, technical specifications, manufacturing process, installation, etc.
By the end of this guide, you will be able to buy a socket clevis without hiring an expert.
Let’s dive right in.
Socket clevis is also known as socket tongue is a very integral component of the pole line technology.
It is commonly used on overhead lines, transmission lines, and power lines.
It is a major component in pole line hardware which usually connects the socket type insulator and the tension clamp.
Have a look at this:
Socket clevis
The connection of the socket clevis varies in different countries depending on the laws that govern pole line technology.
So, it is important to know the connection in your country before deciding to place an order for the hardware.
For instance, in Africa the kind of socket clevis used includes:
The outer diameter lies between 7 mm and 18.2mm (25 square millimeters and 150 square millimeters).
It was also used on “standard disc insulators of ball and socket type” with the diameter of the ball pin of 16 mm
As an integral part of the pole line hardware, socket clevis is used for some purposes.
Transmission line
A socket clevis is an assembly of various parts and components.
Even though they vary in designs and shapes, here are some of the most common parts.
Socket clevis
It is a piece of metal usually U-shaped and secured with a clevis pin and a bolt.
Also, it can be secured using a hinged metal loop which has a quick-release locking pin mechanism.
It acts as the main link in different linking systems as they give quick connections and disconnections.
It is an integral part of a clevis fastener which has three main components including clevis pin, clevis, and tang.
The pins are of two types including unthreaded and threaded.
Unthreaded pins have a dome shaped head at one end and on the other end, there is a cross hole.
To keep the clevis pin in place, a split pin or a cotter pin is used.
The threaded pin on the other end has formed heads on one side while the other side is merely threaded.
A nut comes in handy when the pin has to be put in place.
It can be used to act in place of a clevis pin even though it does not take the stress handled by the clevis pin.
They are made to take and maintain tension loads.
It is also known as a split pin depending on the country it is being used in.
Remember, this is a piece of metal that acts as a fastener with ends that are bent at installation.
It is used in fastening two pieces of metal together.
It is a type of fastener that has external male threads used and has similarities to a screw.
It is usually used together with a nut.
On one end there is the bolt head and on the other end is the external male thread.
This is a type of fastener that has a threaded hole.
It is used together with a bolt to fasten or join different parts together.
The partnership is put together with the combination of the threads through friction.
Apart from that, it depends on the stretching and compression of the parts that are joined together.
Before you buy a socket clevis, it is important to pay attention to the following key technical specifications:
Different designs of socket clevis
The type of materials used in making the socket clevises are steel and iron.
These materials are preferred because they are strong enough and can withstand weight and stresses.
Socket clevises are passed through the process of hot dip galvanization to make them corrosion resistant.
Hot dip galvanization involves dipping the iron or steel clevis in zinc to plate it and give it the final smooth touch.
The iron and steel are bathed in molten zinc at a temperature of 449 degrees Celsius.
The dimensions on the socket clevis vary depending on the size of the device.
Also, the bigger the size of the socket clevis the greater the dimensions.
The width and length are measured in millimeters while the weight is determined in kilograms.
The design on the socket clevis is dependent on the company that manufactures it.
Normally, the customer has a say in the kind of design that he will require and for the task, it would perform.
The design of the socket clevis has to match the function that it was meant to perform.
The rated load on the socket clevis depends on the amount of power it will be handling.
The customer has to specify the function that the clevis will perform before purchasing the clevis.
The manufacturer will then advise on the most appropriate socket clevis concerning the rated load.
The weight of the socket clevis depends on the size of the device, the material used in making the device.
Other materials are heavier than others resulting in a great difference in weight.
The dimensions such as width, and length do vary and so does the weight.
Rax Industry manufactures socket clevises from cast iron.
The process of manufacturing starts with heating, molding, annealing and then hot dip galvanization.
Technical drawing of socket clevis
For more information, please visit Glass Insulator.
The processes mentioned above are risky and usually left for industries to perform.
Materials: the main raw material required is iron and a mold of the socket clevis.
Some machines are required for this process that are quite expensive.
This is the reason why it is left for the major industries such as Rax Industry to manufacture.
Caution: The process of making a clevis involves handling iron at very high temperatures.
It is a dangerous process and you have to be very cautious when handling molten iron.
You should also put on protective clothes and boots to protect you from any accidents that may occur.
Measurements: This is the process of getting the right sizes of the material to be used in manufacturing.
It is done according to the customer’s specifications in the case of custom-made socket clevises.
The material is cut into the required pieces before being subjected to the other processes.
Heating Process: Cast iron is heated at very high temperatures so that it can melt.
Cast iron is the most preferred material because it melts at lower temperatures as compared to others.
It is transformed from a solid to a liquid state.
Molten iron is very hot and a lot of caution should be taken during this process.
Apart from the low melting, cast iron has good fluidity, excellent machinability, wear resistance, and resistant deformation.
These properties make it the most preferred material used in making the socket clevis.
Molding: Molten iron is then poured into the mold of the socket clevis.
The mold is shaped in such a way that it has a hole resembling a socket tongue.
Liquid iron takes the shape of the mold which is the shape of the socket clevis.
Molded socket clevis
Annealing: The third step is annealing which is a form of heat treatment that alters the microstructure of the iron.
It is a process that makes the socket clevis achieve its strength, hardness, and ductility.
Cooling: the fourth step involves leaving the molded iron to cool.
The cooling process is slow to allow the mold to stay in shape and not crack.
Hot dip galvanization is the last process that the cooled down iron is taken through.
This involves coating the socket clevis using Zinc to protect it from corrosion.
The socket clevis is dipped in molten zinc at a temperature of 449 degrees Celsius.
At this point, the socket clevis is ready and is inspected to make sure it is good for use.
Installation of the socket clevis is a process that requires you to have the poles in place before attempting installation.
Make sure that all the materials are in place too and a ladder is available to elevate you to the required heights.
Socket clevis
The socket clevis is a very important component of the pole line hardware and is installed by professionals.
The kind of task it is expected to perform requires people with experience to install it as mistakes are not accepted.
It is also very dangerous to attempt installation without the help of other people meaning it cannot be done individually.
Different companies offer customized products according to the specifications of the customer.
Socket clevis comes in different sizes and designs so long as it fits and performs its functions well.
As a customer, you are advised to be careful when purchasing socket clevis as they come with different load rates.
Wait a minute!
Do you need socket clevis for your transmission and distribution lines?
Talk to us today – our team will be ready to help you.
The socket clevis is an indispensable pole line hardware that connects the tension clamp and socket type insulator.
Socket clevis is also called socket tongue, it is widely used on transmission lines, overhead lines, and power lines.
When choosing a socket clevis, it is important to follow the key technical specifications:
According to different transmission line voltages, there are 70kn,120kn,160kn
Product Description
The Socket Clevis Eyes are malleabe iron or casting steel, these curity clips are bronze or stainless steel, cotter pins are stainless, ferrous parts are hot-dip galvanized. They are used to connect insulator and electric power fittings on ultra high voltage transmission line.
FAQ
Q:CAN YOU HELP US IMPROT AND EXPORT?
A:We will have a professional team to serve you.
Q:WHAT'S THE CERTIFICATES DO YOU HAVE?
A:We have certificates of ISO,CE, BV,SGS.
Q:WHAT'S YOUR WARRANTY PERIOD?
A:1 year in general.
Q:CAN YOU DO OEM SERVICE?
A:YES,we can.
Q:WHAT YOU LEAD TIME?
A:Our standard models are in stock ,as for big orders ,it take about 15 days.
Q:CAN YOU PROVIDE FREE SAMPLES?
A:Yes,please contact us to know the sample policy.
The Socket Clevis Eyes are malleabe iron or casting steel, these curity clips are bronze or stainless steel, cotter pins are stainless, ferrous parts are hot-dip galvanized. They are used to connect insulator and electric power fittings on ultra high voltage transmission line. The Socket Clevis Eyes are malleabe iron or casting steel, these curity clips are bronze or stainless steel, cotter pins are stainless, ferrous parts are hot-dip galvanized. They are used to connect insulator and electric power fittings on ultra high voltage transmission line.
Contact us to discuss your requirements of Grade 4.8 Bolt. Our experienced sales team can help you identify the options that best suit your needs.