Want more information on Stainless Steel Short Lever Micro Switch Supply? Feel free to contact us.
What are micro switches used for?
Micro switches have many uses, some more industrial and others more common place.
The Micro switches that we can offer have been successfully used in;
· Building, Automation and Security
· Home Applications
Micro Switches are used for many different applications within building, automation and security. Some examples of these applications are;
Push buttons for alarms and call points &#; micro switches are used as the buttons within fire alarms, emergency stop controls, emergency door releases. These devices are designed to be pressed in an emergency to manually activate an alarm.
Triggers to prevent devices from being dismounted &#; devices such as infrared detection alarms, card readers and access control panels will contain a micro switch so that if the device is removed, dismounted or damaged an alarm will trigger.
Turning devices for surveillance cameras &#; micro switches are often used within the turning device, the micro switch will be activated when the turning device reaches its furthest point of motion. This ensures that the camera is moving into the position it should and not being compromised.
HVAC applications&#; air pressure micro switches are used for detecting change in air pressure and switches for control panels.
Elevator applications&#; micro switches are used for manual open door switches and control panel switches for floor selection within the elevator.
Access Control &#; Micro switches can be used for electrical door locks and will detect the opening and closing of a door as well as the locking or unlocking. Micro switches can also be used to detect when a roller door is being opened (rolled up). They can be used on circuit breakers for on-off status detection and on control panels. Micro switches are also used for detecting the position of Cam and Bolt on safe door locks.
Timer Controls &#; micro switches are also used within timer controls and will trigger when the timer runs out.
Micro switches are also used for applications within home appliances. These include:
Washing Machines&#; Micro switches are used at the power supply to turn the machine off/on, they are used for detecting switching power, angle of drums and filter. They will detect the door open-close status and are used on the control panel buttons. Inside the washing machine micro switches are also used for detecting the water level.
Refrigerators &#; micro switches are used within refrigerators on the ice and water dispenser, they can detect if the ice maker is in the correct position.
Air Conditioning Units &#; Micro switches can detect if the door panels on air conditioning units are closed. They can detect the angle of the louvers and are also used as reset buttons on the device.
Rice Cookers and Microwave Ovens &#; within rice cookers, micro switches are used for detecting the open/close status of the cover. And within microwave ovens they are often used as safety short switches. In both microwave ovens and rice cookers, micro switches are used for control panel switches.
Our Micro Switches are one of our newer product categories. They offer excellent performance, high reliability and long service life. See our full range of micro switches here.
Micro-switches have become essential parts of the sensing & control community of different fields like industrial, agriculture, construction, transportation, and commercial. So there are trillions of micro switches used in industrial equipment, construction or agriculture machinery, & control systems around the world. These switches are simple and small devices including two contacts like NO and NC which are connected with a snap-action switching mechanism. These switches are capable of performing safely, reliably, and accurately in several harsh environments. So this article discusses an overview of micro switch &#; types with applications.
Micro switch definition is: It is a small and very sensitive switch that activates by using minimum physical force is known as a micro switch or miniature snap action switch. This is one kind of momentary contact switch which is widely used as a sensor in industrial, medical instruments & automotive.
The switches are frequently used in switch panels & home appliances with small buttons. These switches are normally economical & they can work for a long time. These switches can be used as safety devices because they are sensitive and reliable. The micro switch symbol is shown below.
The micro switch includes three pins common (C), normally closed (NC), and normally opened (NO). Here, the common pin is an input pin, the NC pin is output1 and the NO pin is output2.
The construction of a micro switch can be done by using different components like plunger or actuator, cover, moving piece, support, NC terminal, NO terminal, contact, and, moving arm.
Plunger
The plunger is also known as an actuator which is one type of mechanical component, used to control a circuit manually by turning ON & OFF.
Cover
The cover of the switch protects from external forces.
Are you interested in learning more about Industrial Control Switches? Contact us today to secure an expert consultation!
Moving Piece
The moving piece used to apply the operating power to the contacts is known as the actuator.
Support
This is used to give support to the micro switch.
NO Terminal
NO terminal is also known as a normally open terminal. Here, NO terminal specifies the contact of the switch will be open by default. So, if you connect it within a circuit, there is no flow of current within the circuit.
NC Terminal
NC terminal is also known as a normally close terminal. It is the opposite function of the NO terminal. The contacts of the switch will be in closed condition. So it allows the flow of current throughout the circuit.
Contact
The contact in a switch is an electrically conductive material piece, normally metal. The main function of this part is to make or break electrical continuity.
Moving Arm
The moving arm is a lever in a switch, used to activate & operate the micro switch.
The working principle of a micro switch is, that once this switch touches an object, then contacts will change their position. So this switch working principle mainly includes the following.
When you press the lever of the switch, then the circuit&#;s normally closed pin will be opened, and the normally opened pi will be closed. Similarly, when you open the lever of the switch then the circuit&#;s normally close or NC pin will carry current whereas normally open or NO circuit can insulate electrically.
In addition, the fundamental feature of the micro-switch is the tipping-point mechanism. So this feature will help to generate particular trips and reset points wherever contacts will change the condition.
The features of micro switches include the following.
The circuit diagram of the micro switch includes the following, The following circuit can be built with a micro switch to control two leds with a battery. Generally, the micro switch includes three terminals like C, NO, and NC. The connection of this circuit can be done like the circuit shown below.
Once the lever is pressed, the common terminal and NC terminal of the switch are connected. So there is no connection to NO terminal of the switch. As a result, the Green color will turn ON
Similarly, once the lever is opened, the common terminal and NC terminal of the switch are connected. So there is no connection to the NC terminal of the switch. As a result, the Blue color LED will turn ON. Based on the application, we can use this switch in NO or NC mode.
The difference between micro switch and limit switch includes the following.
Micro Switch Limit Switch This is a small and very sensitive switch. This is an electromechanical device. This switch is also known as a miniature snap-action switch. This switch is also known as the end switch or position switch. The function of a micro switch is to switch an electrical circuit ON/OFF or to close a circuit automatically because of a mechanical load. The function of the limit switch is to sense the object&#;s presence or absence. A micro switch includes two limit switches like NO and NC which operate together & sharing a common terminal. A limit switch can be operated through the presence of an object or motion of a machine part. The types of micro switches are; pin plunger, spring pin, spring short, panel mount, leaf spring, leaf lever, roller leaf spring, etc. The types of limit switches are whisker, roller, lever limit, and plunger. It has less contact gap. It has a high contact gap as compared to micro switch.There are different types of micro switches available in the market like pin plunger, spring pin plunger, spring short plunger, panel mount pin plunger, panel mount roller pin plunger, leaf spring, roller leaf spring, leaf lever, simulated roller leaf lever, hinge lever, simulated roller lever, hinge roller lever, reverse operation hinge lever, reverse operation hinge roller lever, rotating operation and flexible rod. Some of them are discussed below.
A hinge roller lever switch normally includes a roller that connects to its hinged lever. So this switch is applicable for high-speed camera operation.
These types of switches are common with low-torque actuators. So, this kind of switch is applicable for recognizing light objects such as paper currency.
The pin plunger micro switch is perfect for direct, short strokes. Thus, it can be used to detect high-precision positions directly In addition, this kind of switch requires a consistent stopper because its overtravel has the shortest actuator.
The leaf spring micro switch includes a more significant stroke due to the powerful leaf spring. So, you can use it for low-speed cams or cylinder drives. In addition, it is very important to maintain the overtravel switch in a specification of application for two important reasons to avoid damage & second one is due to the leaf spring having a permanent bearing point.
As compared to a pin plunger, a spring pin plunger has a longer overtravel. But you can also utilize this switch for similar applications. When using this switch, make sure the load is on the center of the plunger and this is due to the plunger&#;s diameter being somewhat larger.
As compared to other types of switches, this microswitch has the biggest overtravel. This switch can be mounted to a panel through a nut and hexagonal locknut. After that, you can control this switch manually or mechanically. In addition, this switch can be used with a low-speed cam.
The maintenance of micro switches can be done like the following.
The advantages of the micro switch include the following.
The disadvantages of micro switches include the following.
Most of these switches face some issues like low-quality parts or components. The faults that can affect a micro switch are components getting burnt, depreciation, stops working suddenly.
The applications of the micro switch include the following.
Thus, this is all about an overview of a micro switch &#; working with applications. The features of this switch include compact size, boosted service life, less sensitivity to vibrations & high accelerations, increased electrical properties, etc. There are different types of microswitches but their selection mainly depends on the requirement. But it is significant to connect these switches properly in your application to get the best results. Here is a question for you, what is the roller leaf spring switch?
For more Tz-information, please contact us. We will provide professional answers.