Since there is common confusion about the different perimeter detection technologies, where they are used and the cost associated with each of them RBtec team thought it would be a great tool to clarify the differences and advantages and cases you should choose one or the other.
Since there is common confusion about the different perimeter detection technologies, where they are used and the cost associated with each of them RBtec team thought it would be a great tool to clarify the differences and advantages and cases you should choose one or the other.
But let&#;s start first with the definition of what is a perimeter security system. By Wikipedia &#;A security alarm is a system designed to detect intrusion &#; unauthorized entry &#; into a building or other areas such as a home or school. Security alarms are used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders.&#;
That means that our main goal when choosing a perimeter fence detection system is to remember the goal is to detect the intruder no matter what technology you chose! Now the next step is to understand what technology meets your needs, budget, and infrastructure.
Strain/vibration sensor cable mounted on a chain-link/welded mesh/barbed-wire fence.
Knowing if this is the right product for you is based on 3 categories:
Perimeter fence detection system vary in design but each is generally based on the detection of an intruder attempting to cut or climb over a fence. Depending on the version selected, it can be sensitive to different frequencies or levels of noise or vibration. The system is based on a coaxial sensor cable with the controller having the ability to differentiate between signals from the cable or fence being cut, an intruder climbing the fence, someone lifting the fence, or bad weather conditions.
The systems are designed to detect and analyze incoming electronic signals received from the sensor cable, and then to generate alarms from signals which exceed preset conditions. The systems have adjustable electronics to permit installers to change the sensitivity of the alarm detectors to suit specific environmental conditions. The tuning of the system is usually accomplished during the commissioning of the detection devices.
These are also called motion detectors, trip sensors, line-of-sight, or &#;laser&#; sensors. Though similar to the PIR motion sensors you may use inside your home or office, they&#;re designed for outdoors. Usually, there are two sensors aligned with one another to form a &#;gate&#; where If someone breaks the beam, the sensors trigger an alarm. Available in wire or wireless versions, sensors are typically installed inside the perimeter and require a clear path around the fence line to create a &#;no-go zone.&#; This means nothing can be parked or stored along the fence line.
Though this technology may sound like a great way to protect your facility it has drawbacks, the main issue is false alarms.
False alarms can be triggered when something disrupts the sensor &#;line of sight&#;. Since this sensor works similar to the human eye if the sensors can&#;t &#;see&#; they won&#;t be able to detect and trigger a false alarm. The false alarms can be caused when a physical object (vegetation, vehicles, dirt, animals, etc.) blocks the view or direct sunlight blinds the sensors. Even extreme temperature can affect detection distance and capability, as these are based on an infrared heat signature. Sensors also tend to require frequent maintenance. They&#;re usually cheaper in the short term but expensive in the long term since you need to add more and more layers to compensate for the false alarms.
HERE ARE FIVE REASONS WHY SECURITY CAMERAS ARE NOT ENOUGH:
1. Cameras are a forensic tool, in most cases, you will see the video AFTER the event already ended. It does not help you stop or prevent the break-in event.
2. Usually, cameras won&#;t cover 100% of the perimeter, in comparison to a fence alarm system you will always have blind spots where people can come in undetected.
3. Video analytics ability to detect is heavily relying on its ability to &#;see&#;, it&#;s a common mistake to think it will be able to monitor the perimeter 365/24/7. If weather conditions or objects (Vehicles, solar panels, containers) will block its line of sight the camera won&#;t able to detect an intrusion.
4. If you currently have no outdoor security the trespasser has an opportunity to plan their attack by surveying the area from the outside without being detected.
5. Indoor security does not protect the outside of your building, nor any items, property, or machinery left outside of the alarmed zone.
Bandweaver utilises Perimeter Intrusion Detection Systems (PIDS) to ensure that organisations are fully secure and to help reduce operational risk.
With ever increasing threat levels it is important that organisations properly secure their assets. This starts at the perimeter of their sites where there has never been a more important time to deploy robust, reliable and secure detection strategies to mitigate operational risk.
Prompt and highly accurate location information of a would-be intruder ensures a fast and appropriate response to minimise any loss. Ensuring that your perimeter intrusion detection system is fully integrated into your security solution provides real time data. Therefore creating the ability to track and respond to intruders.
Fiber optic technology is fast becoming the technology of choice. Especially for those organisations looking to deploy a cost-effective reliable solution with significantly lower full life cost of ownership.
Bandweaver&#;s advanced range of fiber optic intrusion detection solutions provide both covert buried and fence or wall mounted detection capabilities from a single detection unit. With fully scalable systems for sites less than 5km to more than 100km Bandweaver has the solution for you.
But let&#;s start first with the definition of what is a perimeter security system. By Wikipedia &#;A security alarm is a system designed to detect intrusion &#; unauthorized entry &#; into a building or other areas such as a home or school. Security alarms are used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders.&#;
That means that our main goal when choosing a perimeter fence detection system is to remember the goal is to detect the intruder no matter what technology you chose! Now the next step is to understand what technology meets your needs, budget, and infrastructure.
Strain/vibration sensor cable mounted on a chain-link/welded mesh/barbed-wire fence.
Knowing if this is the right product for you is based on 3 categories:
Perimeter fence detection system vary in design but each is generally based on the detection of an intruder attempting to cut or climb over a fence. Depending on the version selected, it can be sensitive to different frequencies or levels of noise or vibration. The system is based on a coaxial sensor cable with the controller having the ability to differentiate between signals from the cable or fence being cut, an intruder climbing the fence, someone lifting the fence, or bad weather conditions.
The systems are designed to detect and analyze incoming electronic signals received from the sensor cable, and then to generate alarms from signals which exceed preset conditions. The systems have adjustable electronics to permit installers to change the sensitivity of the alarm detectors to suit specific environmental conditions. The tuning of the system is usually accomplished during the commissioning of the detection devices.
If you are looking for more details, kindly visit RF970 Fiber Optic Perimeter Intrusion Detection Systems.
These are also called motion detectors, trip sensors, line-of-sight, or &#;laser&#; sensors. Though similar to the PIR motion sensors you may use inside your home or office, they&#;re designed for outdoors. Usually, there are two sensors aligned with one another to form a &#;gate&#; where If someone breaks the beam, the sensors trigger an alarm. Available in wire or wireless versions, sensors are typically installed inside the perimeter and require a clear path around the fence line to create a &#;no-go zone.&#; This means nothing can be parked or stored along the fence line.
Though this technology may sound like a great way to protect your facility it has drawbacks, the main issue is false alarms.
False alarms can be triggered when something disrupts the sensor &#;line of sight&#;. Since this sensor works similar to the human eye if the sensors can&#;t &#;see&#; they won&#;t be able to detect and trigger a false alarm. The false alarms can be caused when a physical object (vegetation, vehicles, dirt, animals, etc.) blocks the view or direct sunlight blinds the sensors. Even extreme temperature can affect detection distance and capability, as these are based on an infrared heat signature. Sensors also tend to require frequent maintenance. They&#;re usually cheaper in the short term but expensive in the long term since you need to add more and more layers to compensate for the false alarms.
HERE ARE FIVE REASONS WHY SECURITY CAMERAS ARE NOT ENOUGH:
1. Cameras are a forensic tool, in most cases, you will see the video AFTER the event already ended. It does not help you stop or prevent the break-in event.
2. Usually, cameras won&#;t cover 100% of the perimeter, in comparison to a fence alarm system you will always have blind spots where people can come in undetected.
3. Video analytics ability to detect is heavily relying on its ability to &#;see&#;, it&#;s a common mistake to think it will be able to monitor the perimeter 365/24/7. If weather conditions or objects (Vehicles, solar panels, containers) will block its line of sight the camera won&#;t able to detect an intrusion.
4. If you currently have no outdoor security the trespasser has an opportunity to plan their attack by surveying the area from the outside without being detected.
5. Indoor security does not protect the outside of your building, nor any items, property, or machinery left outside of the alarmed zone.
Bandweaver utilises Perimeter Intrusion Detection Systems (PIDS) to ensure that organisations are fully secure and to help reduce operational risk.
With ever increasing threat levels it is important that organisations properly secure their assets. This starts at the perimeter of their sites where there has never been a more important time to deploy robust, reliable and secure detection strategies to mitigate operational risk.
Prompt and highly accurate location information of a would-be intruder ensures a fast and appropriate response to minimise any loss. Ensuring that your perimeter intrusion detection system is fully integrated into your security solution provides real time data. Therefore creating the ability to track and respond to intruders.
Fiber optic technology is fast becoming the technology of choice. Especially for those organisations looking to deploy a cost-effective reliable solution with significantly lower full life cost of ownership.
Bandweaver&#;s advanced range of fiber optic intrusion detection solutions provide both covert buried and fence or wall mounted detection capabilities from a single detection unit. With fully scalable systems for sites less than 5km to more than 100km Bandweaver has the solution for you.
Want more information on RF970 fiber optic fence sensor system? Feel free to contact us.